Bronsun Brow Perm Lamination - Step 1 | Me.Beaute
top of page

The new compositions softly affect eyebrows, virtually have no unpleasant odour, and act extremely fast.The formula does not contain thioglycolates, ammonia, or hydrogen peroxide. The main active ingredient is cysteamine. Due to this, the compositions work delicately, but very effectively. The gentle effect and high concentration of care components allow to protect hairs to the utmost during and after long-term styling.

 

QUICK
• Express formula based on cysteamine
• Requires no glue


GENTLE
• High concentration of care components


SAFE
• Soft effect on hairs and skin
• Less vapour and unpleasant odours


CONVENIENT
• Bottle with a dispenser
• Large volume 10 ml - lasts up to 50 treatments

 

Directions for use: 

  • Cleanse the eyebrow area.
  • Degrease the skin and hairs.
  • Apply a thin layer of composition #1 Brow Lift on dry eyebrows. Exposure time depends on density and thickness of hairs. Timings vary from 12-15 minutes.
  • Remove composition #1 with a moist cotton pad.
  • Apply composition #2 Brow Sculpt in the desired direction. Exposure time is the same as composition #1.
  • Remove with a moist cotton pad.
  • Tinting can be done here.
  • Apply composition #3 Brow Essence on dry eyebrows. DO not rinse.


2-4 minutes Thin, porous hair. 
4-6 minutes Hairs of medium thickness, and hairs that have minutes previously been chemically treated.
5-15 minutes  Coarse, dense, thick hairs, and hairs that have not minutes previously been chemically treated.


IT IS ALWAYS RECOMMENDED TO MONITOR THE CONDITION OF HAIRS DURING THE EXPOSURE TIME.
6. As the exposure time is over, completely remove Composition #1 with a wet cotton pad, moving in the direction of hair growth. Carefully adjust the shape with the spoolie, creating the desired direction.
7. Apply Composition #2 BROW SCULPT BRONSUN on the eyebrows, spread along the hairs, carefully creating the desired direction. The exposure time for Composition #2 is the same as for Composition #1.
8. As the exposure time is over, completely remove Composition #2 with a wet cotton pad.
9. Carry out the tinting procedure with BRONSUN dye.
Mix milk-cream developer BRONSUN with dye BRONSUN, following the instructions. The exposure time for dye during the long-term brow perm procedure must be reduced from the one stated in the instructions to 2-5 minutes, depending on the chosen shade and desired effect.
10. As the exposure time is over, remove the dye with a wet cotton pad.
11. Apply Composition #3 BROW ESSENCE BRONSUN on the dry eyebrows with the spoolie, creating the desired shape. Do not rinse. 

 

Bronsun Brow Perm Lamination - Step 1

$63.96Price

    You might also like.

    bottom of page